Come see us on Thanksgiving Weekend for our Best Prices of the Year and up to 48 months, No-Interest Financing W.A.C.!

0

Your Cart is Empty

Powerwerks PW505 Personal PA Tower

Item ID: PW505

As low as $3.54 per month.

0% Interest for 48 Months

Buy a Powerwerks PW505 Personal PA Tower for a limited time and be qualified to receive financing of 0% INTEREST for up to 48 MONTHS. Click here for more details.

Free Shipping on Most Products

Free Shipping on any order(s) above $9.99 (over-sized products not included)

● Lightweight & Portable
● Input & Output Selections
● Balanced XLR Input
● Available with or without BlueTooth
● New attractive design

Product Specifications

Output Power 1%
50W 8 Ohm load
Accepted Inputs
Channels 1 and 2: Mic XLR Balanced, Line level 1/4" Un-balanced Channel 3: 1/8" Stereo Line Level
Hum & Noise
-65dB: Residual Noise, all level controls 0% (minimum) -48dB: Nominal System Noise, all level controls at 50%
System Gain (Measurements made at 1kHz)
+70dB: Mic to Speaker Output (CH 1 & 2)
System Gain
+56dB: Line to Speaker Output (CH 1 & 2)
+42dB: AUX IN to Speaker Output
Channel EQ (high low)
4kHz and above, 800Hz and below
POWERLINK (IN and OUT)
Both jacks accept a balanced input and sends a pre-master volume output mix of channels. Recommended use: Linking two PW50BT units together.
Subwoofer Out
Line Out 20Hz-150Hz.
Phantom Power
+15V Mic Inputs (Ch1 & 2)
Power Requirements USA/ Canada
120VAC/60Hz, 80W nominal
Power Requirements Europe
230VAC/50Hz, 80W nominal
Power Requirements UK
230VAC/50Hz, 80W nominal
Power Requirements Australia
240VAC/50Hz, 80W nominal
Power Requirements Japan
100VAC/50-60Hz, 80W nominal
Speakers
Two 5" 25W 16 Ohm each
Horn
3.5" Prezo Driver
Power Capacity
50W RMS
Frequency Response
60KHz: Full Range (subwoofer jack not used) 150Hz- 20kHz: Crossover Active (1/4" mono plug in subwoofer jack)
Nominal Impedance
80 Ohms Not designed for external speakers
Bluetooth Module Features
Bluetooth 3.0+EDR compliant.Typical +2dBm Class 2 output power.Audio DAC:94dB SNR.A2DP profile support.
Dimensions & Weight mm/kg
192 W x 478 H x 185 D / 7.2 kg
Dimensions & Weight Inches/Pound
7.6 W x 18.8 H x 7.3 D / 16 lb