Yamaha Tour Custom 5pc TC2FS57

Features:

Yamaha Tour Custom 5pc TC2FS57

Description

A compact configuration perfect for streamlined rock or alternative.

The Yamaha Tour Custom 5-Piece Fusion Floor Drum Set includes a 22" x 17" bass drum, 10" x 8" and 12" x 9" toms with mounts, 16" x 16" floor tom, a 14" x 6" x 14" matching wood snare, and it also includes the Yamaha HW-780 hardware pack. This hardware pack includes a single-chain drive bass drum pedal, a medium-weight snare drum stand, 2 medium-weight boom cymbal stands, and a single-braced hi-hat stand.

Yamaha Tour Custom Drums

All Yamaha wood drums have one thing in common: Yamaha's craftsmen create every drum shell using their exclusive staggered diagonal seam Air Seal System just as they have since 1967. Each 2- or 3-ply master ply is cut to very precise tolerance with a diagonal cut on each end. The diagonal seam in the drum shell will not separate, eliminating the need to fill gaps in the bearing edge with filler putty. These plies have glue applied and are then put into the mold by hand, one master ply at a time. The craftsman then inserts an air bag into the mold and inflates it, clamping the shell with even pressure all the way around. This process creates a drum shell that is strong, starts round, and stays round for many years.

Tour Custom drum shells are 100% maple. The bass drums are 7-ply 7mm and have a warm, deep tone; the toms are 6-ply 6mm, with lots of warmth and resonance and have a wide tuning range. The matching wood snare drum has body, yet plenty of high end and is very articulate at all dynamic levels.

All Tour Custom drums have 60° R2 bearing edges. This is something new for Yamaha on a maple shell drum set. This bearing edge has a rounder profile so that there is more shell to head contact. This gives the drums clarity in the low-end fundamental and added warmth.

Sturdy, yet simple in design; the bass drum spurs hold the bass drum firmly in place even under heavy playing. They are height adjustable using a drum key, and there are steel spikes that can be exposed when extra hold is needed. They fold up compact for transport and are marked with angle indicators so that you can set them up the same every time.

All Tour Custom toms and floor toms use the YESS (Yamaha Enhanced Sustain System). The toms have a mount attached to the shell at the nodal point by two bolts. This system allows the drum shell to vibrate freely for maximum sustain without restricting with where the placement of the drums. The floor tom brackets are small, minimal contact mounts that are located at the nodal point. They hold the legs securely in place without restricting the vibration of the shell.

Tour Custom drum sets include the TH-945 triple tom holder with Yamaha's tom ball clamp that gives you 360° rotation. The ball, made of a super-hard resin, is held in place by a single bolt making angle adjustments on the toms quick and easy. The toms lock firmly in place at virtually any angle you want. This versatile tom holder lets you mount any combination of up to three toms and/or cymbals by using either the standard or the long version of Yamaha's tom ball clamp and CH model cymbal booms.

Cymbals not included.

Yamaha HW-780 Drum Hardware pack

The Yamaha HW-780 Drum Hardware pack features high-quality components manufactured to precise tolerances in Yamaha's motorcycle factory that will easily withstand the rigors of even the most hard-hitting drummers.

FP-7210 Bass Drum Pedal

Single chain drive pedal provides smooth, quiet action that will satisfy the requirements of any musical style. Additional features includes a real felt beater, a spring lock system, great footboard and heel designs and the ability to adjust footboard and beater angles. Reinforced footboard hoop clamps and horizontal frame stabilizers.

SS-740A Snare Drum Stand

This medium-weight snare drum stand provides sturdy support for your prized snare drums. It features single-bracing, a compact design, and is height-adjustable for your playing comfort.

(2) CS-755 Medium-weight Boom Cymbal Stands

Built with the modern drummer in mind. Their sturdy design and high-quality appointments make these stands a choice you can be proud of. They feature single-braced legs, vertical tilters, 17" hideaway boom arms with memory locks, boom tilter clamps that hold the booms securely in place, and tube caps that prevent the stands from rattling.

HS-740A Hi-hat Stand

Built with quality and affordability in mind. It is manufactured to tolerate extreme situations and will easily withstand the rigors of even the most hard-hitting drummers. It features a medium-weight design, tension adjustability, and has rotating legs.

Tour Custom Set Features:

Four Beautiful Lacquer Finishes

Tour Custom drums are all finished in high-gloss lacquer, three translucent and one solid finish. The Brown Sunburst (BSB), Ocean Blue (OCB), and Sakura White (SAW) allow the beauty of the maple grain show through. The Black Onyx (BKO) is a deep, rich, solid black finish. 

All Shells 100% Maple ** Bass drum hoops are made of Maple and Philippine Mahogany

All maple shells give the Tour Custom drums itswarm, bright tone. Shells are designed with a 60-degree R2 bearing edge that adds the tonal depth found in vintage drums and just the right amount of sustain. Finished with a high gloss lacquer (all new colors) maximizes the sonic potential of the maple shell creating drums that sound and play great in any musical style. 

Sizes:

• 22" x 17" bass drum
• 10" x 8" tom with mount
• 12" x 9" tom with mount
• 16" x 16" floor tom
• 14" x 6" wood snare

Finishes

BKO: Black Onyx

BRS: Brown Sunburst

CR: Cranberry Red

NW: Natural Wood

RBS: Red Black Sunburst

Scroll down for purchase options for each color.

Manufacturer:

Yamaha